New

Symphony W15i 3G Tested Firmware Flash File Free Download 1000% tested


Password is : no
How to Flash MTK SPD QLM All Write For Your Easy And have download Link
How to Flash MTK Stock Firmware ROM (Flash File)
Step 1: Download and extract the firmware on your computer.
Step 2: After extracting you will find the SP Flash Tool, Driver and instruction manual.

Step 3: Install the USB Drivers (skip if drivers are already installed).
Step 4: Open the SP Flash Tool and load the Scatter File from the firmware folder.
Step 5: Connect your Smartphone to the computer using the USB Driver.
Step 6: Click on Upgrade / Download Button in the SP Flash Tool to Begin the Flashing.
Step 7: Green Ring will appear at the end of successful Flash.


How To Flash:SPD
1. FactoryDownload/ResearchDownload
2. Unpack ROM and extract File.pac
3. Run ResearchDownload or FactoryDownload
4. Click on "Load packet" and add the .pac
5. Click on "Start"
6. Connect your android device to the computer
7. During the flashing your mobile will restart automatically
8. Finish


How To Flash: QLM
1. Unpack ROM and extract File.xml
2. Run InfinityBox CM2QLM
3. Power Off Phone , Remove battery , Insert back
4. PRESS and HOLD BOTH VOLUME KEYS!
5. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!"
6. During the flashing your mobile will restart automatically
7. Finish


Important Notes: Take a Backup of your mobile data before flashing or installing the firmware on your smartphone. As this will help you to recover the data whenever any thing wrong happens to your
Symphony W15i 3G Tested Firmware Flash File Free Download 1000% tested Reviewed by The Confusers on 08:28:00 Rating: 5
All Rights Reserved by Rasalmobile Expert Team © 2018
Designed by EasyFirmware

Contact Form

Name

Email *

Message *

Powered by Blogger.